
Washer and Seat Repairs
A dripping tap usually traces to a worn washer or a damaged seat, so we pull the head apart, reface or swap the parts and reassemble it properly under pressure.
Kallangur Plumber repairs and replaces dripping, stiff and leaking taps across Kallangur, with a fixed quote up front and the common washers, cartridges and seats carried for a one-visit fix.
If we're late, $100 comes off your bill

A tap that drips, grinds or leaks at the base is a small job with a real cost attached, and it is one of the most common calls we run.
Most faults trace back to a handful of worn parts. Washers, seats, spindles, O-rings and cartridges cover the overwhelming majority of tap calls, and most of those parts ride on the van with us.
If the leak is showing up around a shower or bath set, our bathroom plumbing page covers the wet-area side of the work. And if water is appearing somewhere no tap can explain, leak detection is the page for that.

The late-1960s subdivision wave created the first residential blocks here, meaning many homes on the original grid still carry their first compression tap sets, with washers, spindles and seats all worn out together after decades of daily turning.
Townhouse projects around School Road and Brickworks Road mostly specify ceramic-disc mixers, which behave differently: they drip when the cartridge fails, and they need the correct replacement cartridge rather than a generic washer.
At the last census, 74.3 per cent of dwellings here were separate houses, so garden taps, hose points and laundry troughs are part of the ordinary run of jobs we get called to.
Tap work splits into a few familiar jobs, and we stock the parts for all of them:

A dripping tap usually traces to a worn washer or a damaged seat, so we pull the head apart, reface or swap the parts and reassemble it properly under pressure.

Kitchen and bathroom mixers drip from failed cartridges rather than washers, so we match the correct replacement cartridge, swap the seals and spout O-rings, and test the handle action smoothly.

Garden taps and hose points cop the sun and the weather year round, so we reseal leaking bodies, replace worn spindles and fit new points where the garden needs one.

Wall bath sets, shower diverters and bath spouts need their own treatment, because a diverter that will not switch cleanly sends your shower water straight to the bath spout instead.

When a tap body is corroded through or its parts are obsolete, replacement is the honest answer, and we install your chosen tapware and pressure test every connection before leaving.

Sink sets, spouts and under-sink stop valves come under the same visit, so a dripping laundry tap and a weeping stop valve get sorted together without a second trip.
$0 call-out fees, available 24/7, and same-day where we can.

Four faults cover most of the tap calls we get:
A tap that keeps dripping after you shut it off hard usually has a perished washer or a scored seat, and cranking it harder only chews the seat further still.
Handles that grind or take two hands to turn point to mineral build-up or a failing spindle, and forcing them snaps internal parts that were otherwise a straightforward repair job.
Water pooling around the tap body or under the sink means a failed O-ring, a perished flange or a loose connection, and none of it improves with more tightening either.
Hammering when a tap closes can trace back to a loose jumper valve, a worn washer or water pressure that needs a limiting valve fitted to settle the pipework down.

It's easy to live with a dripping tap for months, and that's exactly how a small job turns into a bigger one:
A single tap left dripping loses litres every day it runs, and a garden tap weeping through a humid summer wastes far more than most people guess.
A slow leak under a sink or behind a vanity soaks cabinetry and skirtings long before it shows on the surface, and repairs to both cost more than the tap ever would have.
A scored seat or a failing spindle gets worse every time the tap is used, until a part worth a few dollars takes the whole tap body with it.

Ring (07) 3523 6428 and tell us what's happening in Kallangur. A few quick questions up front means the right parts come on the first visit.

You get flat-rate pricing with no hidden fees before any work starts. Approve it and we get going.

We isolate the water to that tap, pull the head apart, fit the new washer, seat or cartridge, then reassemble and test everything properly under pressure before packing up.

Pay by card or EFTPOS on site when the job's done, or ask us about Fix now, pay later.

Tap repairs are the bread and butter of our week, so the parts, the tools and the habits are all already in place when we pull up at your place.
There are no call-out fees for Kallangur jobs, and no added charge for nights, weekends or public holidays.

Every repair sits under our Fix-It-or-It's-Free guarantee (T&Cs apply). If we're late, $100 comes off your bill.
Each job is done by a licensed plumber under QBCC No: 15024607, and a lifetime labour warranty covers the labour.
Licensed and insured, locally owned and operated, with flat-rate pricing.
Our regular run takes in Dakabin, North Lakes, Griffin, Murrumba Downs and Petrie, all adjoining suburbs along the same northern corridor, so a tap job in each of those suburbs receives identical fixed-quote treatment to work on the home patch. One call covers the lot.
In the older brick homes here the usual culprit is a washer that has perished or a seat scored by years of turning, and we reface or renew it properly on the visit.
It can, because a tap that drips steadily wastes water every hour it runs, and the Unitywater meter on your property records all of it, so the cost builds across a quarter.
They mostly run ceramic-disc mixers rather than compression taps, so a drip means a cartridge replacement, and we carry the common cartridge sizes so the job finishes in one visit.
No, the public water mains beyond your boundary are Unitywater's, but the tap, its pipework and all fixtures past the connection point belong to the property owner.
The tap type, the parts it needs and how easily we can reach the pipework all shape the price, and every job gets a fixed quote in writing before any work starts.
Ring (07) 3523 6428, tell us which tap is playing up and where, and we'll set a visit time that suits you, with the price confirmed before any tools come out of the van.
Give us a ring on (07) 3523 6428 and explain the problem. We're available 24/7, every Kallangur job has zero call-out fees and flat-rate pricing, and we work under QBCC No: 15024607, with same-day when we can.
See the full range of general plumbing work on our plumbing services page, including toilet repairs and kitchen plumbing.
To claim your $0 call-out fee, call (07) 3523 6428 today.